Features and applications
- Most economic solution for small stone sizes.
- Can be used with non load bearing walls such as solid block.
- Serves wide cavity range (20-200) mm Three dimensional flexibility of adjustment.
Description
- The system consists of two main parts, load bearing angle and restraint anchor.
- Load bearing angle is designed to take the vertical load (dead load) of the stone panel while the restraint anchor is supporting the horizontal loads (seismic, wind loads).
- Minimum of one load bearing angle for each stone panel (slab to slab) and minimum of two restraint anchor for each stone.
- Restraint anchor can support the stone from horizontal or vertical joints.
MATERIAL
- All system components are made out of AISI 304 stainless steel (A2) to resist atmospheric and provide a lifetime fixing solution for mechanical stone cladding.
- For highly corrosive environments, the system can be made out of AISI 316 stainless steel (A4).
Width W (mm) | Back Height BH (mm) | Leg L (mm) | Thickness T (mm) | Cavity C (mm) | Stone Thickness Ts (mm) | Dowel D (mm) | Threaded Rod R (mm) | Shell Anchor A (mm) |
25 | 30 | 30 | 2.5 | 20-60 | 30 | Ø 4 x 50 | 6 x 100 | 6 |
25 | 30 | 40 | 2.5 | 60-100 | 40-50 | Ø 4 x 50 | 6 x 150 | 6 |
30 | 30 | 35 | 3 | 20-60 | 30 | Ø 5 x 60 | 8 x 100 | 6 |
30 | 30 | 45 | 3 | 60-100 | 40-50 | Ø 5 x 60 | 8 x 150 | 6 |
For special sizes of Restraint Anchors please contact your Technical Sales Representative.
*for the load bearing angle design and fabrication case-by-case.
